6” Submersible Motor Pumps for Bore Wells

6” submersibles (for borewells) are available in Radial Flow and Mixed Flowmodels.

Their sturdy and robust design ensures an improved and consistent performance, improved life of the pump, energy efficiency and power savings, and spare parts which are easily interchangeable.
 

Applications includes:
Ansons pumpsets Irrigation of Large Fields
Ansons pumpsets Drip and Sprinkler Irrigation
Ansons pumpsets Residential Buildings
Ansons pumpsets Industrial Use
Ansons pumpsets Hotels
Ansons pumpsets Fire Fighting
Ansons pumpsets Fountains
Ansons pumpsets Water Parks
Ansons pumpsets Orchards
Ansons pumpsets Car Washing
 
 
     
Performace Curves of 6” Submersible Radial Pumpsets
 

We have highlighted some of the key features and benefits below:
  Features   Benefits
  Totally enclosed and sealed electric motor, prefilled with a mixture of propylene glycol & filtered water   Prevents entry of unwanted particles and corrosion, thereby increasing motor life
  Special Alloy Gunmetal Bush burnished   Reduces friction and increases the life of the bush
  Polyester Wrapped winding wire   Better Thermal Stability
  Wide Voltage operation, can operate from 220V to 450V (3 phase), and 150V to 250V (1 phase)   Reduces dependency on consistent quality power supply and prevents burning
  Special Breather Valve fitted at the non-driving end   Automatically maintains water level in the motor
  3 metre 3 core special copper wire cable provided along with a cable joining kit   Ease of connection at the time of installation
  Specially designed thrust pads for high axial loads   Improved Reliability
  Diffuser made of special Polymer Polycarbonate glass filled, for radial pumps   Improved Reliability
  Impeller made of Special Gun Metal Alloy (stainless steel can also be provided)   For longer life
  Splined shaft and coupling   for easy coupling of motor and pump
  One Neck ring / wear ring for every stage , in Radial Pumps, and 2 Neck/Wear ring per stage,in Mixed Flow Pump, at every stage   Minimum wear and tear of the impeller
  At every stage, Polyurethane  and Stainless Steel Bush  for Radial Pumps, and Rubber Bearing  and Stainless Steel Bush for Mixed Flow Pumps   Improved shaft stability
  Hardware of stainless steel   Easy repairability
  Strainer provided and use is compulsory   To ensure flow of clean and clear water

Instructions:
1) A use of a reliable and good quality starter along with earth leakage circuit breaker of less than 100 ma rating is compulsory.
2) Proper Earthing is to be provided
3) A non-return valve (NRV must be fitted nearest to the pump to avoid damage due to water hammer.
4) The product shown may differ from actual supply in view of continuous change in design and specifications.

Technical Specifications:
In order to help you appropriately select the right product, we request you to kindly refer to the discharge chart, which is designed to guide you on the basis of the head and discharge of water you would require. Please feel free to contact us for further details and help in selecting the product.
 
     
Ansons Electro Mechanical Works on LinkedIn